*Available with NSF/ANSI 61 Certification
P2-030 – UNDER SEALING SLABS, VOID FILL WITH MINIMAL LIFT
LOW DENSITY RIGID POUR-IN-PLACE FOAM SYSTEM
4.0 LBS DENSITY
P2-030 is a two-component, water blown, all PMDI-based, nominal 4 pcf density, polyurethane foam system designed for undersealing and void filling when minimal lift is required under concrete slab sections. The slow speed reactivity profile allows for excellent flow characteristics when used as an undersealing and void fill material. P2-030 is formulated to be machine processed using applicable plural component polyurethane processing equipment.
P2-042 – SOIL STABILIZATION, ROAD BED CONSTRUCTION, DEEP SOIL INJECTION, VOID FILLING
LOW DENSITY RIGID POUR-IN-PLACE FOAM SYSTEM
3.5 LBS DENSITY
P2-042 is a water blown, all PMDI-based, hydro-insensitive geotechnical polyurethane designed for soil stabilization, road bed construction, deep hole injection, and void-filling applications. The polymer is specially formulated for exceptional flow and Functionality in saturated environments.
P2-486 – LIFTING FOAM & VOID FILL
LIFTING FOAM & VOID FILL
4.0 LBS DENSITY
P2-486 is a plural component, water blown, all PMDI-based, nominal 4 pcf density, polyurethane foam system designed for concrete slab raising, under-slab void fill and cavity fill applications. P2-486 is formulated to be machine processed using applicable plural component polyurethane processing equipment.
P2-003 – HYDROPHOBIC LIFTING FOAM, VOID FILL IN WET AREA
GEOTECHNICAL FOAM SYSTEM
4.0 LBS DENSITY
P2-003 is a hydrophobic, two-component, Polymeric MDI-based, pour-in-place urethane foam system designed for concrete jacking and cavity filling in wet environments. P2-003 has low component viscosities making the system suitable for mechanical mix machines, high pressure (over 600 psi) impingement mixing machines or hand mixing. It has been specially formulated for exceptional flow and to be minimally affected by application in wet environments.
P2-011 – DOT HYDROPHOBIC FOAM LIFTING & VOID FILL
RIGID FOAM SYSTEM
4.8 LBS DENSITY
P2-011 is a two-component, HFC 245fa blown, all PMDI-based, pour-in -place urethane foam system designed for concrete jacking and cavity filling in wet environments. P2-011 has low component viscosities making the system suitable for mechanical mix machines, high pressure (over 600 psi) impingement mixing machines or hand mixing.
P2-023 – LIGHTWEIGHT FILL, TRENCH BREAKERS, LOW EXOTHERM
RIGID FOAM SYSTEM
2.0-2.2 LBS DENSITY
P2-023 is a two-component, water and HFC-245fa co-blown, polyurethane foam system designed for use as a void fill, trench-break material. P2-023 has been formulated to process at 2.0–2.2 pcf depending on lift thickness. P2-023 is designed to be built up in great lift thickness without scorch or splitting. P2-023 is not ASTM E-84 flame spread rated and is not to be used in applications governed by building codes. This product is also offered in a high altitude variation that will maintain the 2 pcf density when processed at high elevations.
P2-039 – LARGE VOID, PIPE ABANDONMENT, UNDERGROUND TANK ABANDONMENT, SOIL STABILIZATION, LOW DENSITY RIGID POUR-IN-PLACE FOAM SYSTEM
2.2 LBS DENSITY
P2-039 is a hydrophobic / hydro-insensitive two-component, HFO blown, low-exotherm polyurethane system. P2-039 offers slow reactivity for greater flow, making it ideal for filling large void areas, pipe abandonment, and underground tank abandonment.
P2-070 – LARGE VOID AREA, PIPE ABANDONMENT, UNDERGROUND TANK ABANDONMENT
RIGID FOAM SYSTEM
2.1 LBS DENSITY
P2-070 is a two-component, HF0 blown, low GWP, all PMDI based, pour-in-place urethane rigid foam system. P2-070 is a low-exotherm system with slow reactivity for greater flow. The system is ideal for filling large void areas, pipe abandonment, and underground tank abandonment.
P2-015 – SOIL STABILIZATION – SINGLE COMPONENT LOW VISCOSITY
SOIL STABILIZER SYSTEM
P2-015 is a low viscosity, polyurethane injection resin designed to stabilize soil. When mixed with catalyst and injected, it migrates through loose soil and into below-grade voids. As it comes into contact with moisture in the soil, P2-015 reacts and expands to form a rigid foam. The foam encapsulates loose soil, fills voids, and forms a solid, watertight barrier.
P2-120 – LOW VISOSITY SINGLE COMPONANT HYDROPHOBIC POLYURETHANE
LIFTING FOAM & VOID FILL
P2-120 is a low viscosity single-component hydrophobic polyurethane used for increasing the load bearing capacity of loosely bound soils, filling voids and I/I mitigation. Ideal for stopping active or flowing water leaks and eliminating water seepage through cracks in stationary concrete structures and assets. Based on the application, the P2-120 requires the use of REG CAT or FAST CAT catalyst.